The Tinusaur Starter EDU bundle consists of 3 electronic boards: the main board with the microcontroller, the additional board with 2 LEDs, and another board with LED, a photoresistor, and a buzzer. Optionally: a USB programmer and a stand or plate.
Package contents
- Tinusaur Board
Tinusaur microcontroller board with ATtiny85 on it (1 MHz, 8-bit RISK CPU, 8KB Flash, 512B RAM, 512B EEPROM) along with all electronic components for its stable operation, battery, and programming connector - Tinusaur Shield LEDx2
Additional shield board with 2 LEDs, 2 resistors, and headers; - Tinusaur Shield EDUx3IO
Additional shield board with LED, photoresistor, buzzer button, 2 resistors, and headers; - USB programmer
USBasp programmer with cable. - Wooden Plate or Stand (optional)
Once assembled, the microcontroller boards can be programmed with our own Blocktinu development environment. This is done in two ways – by block programming or by writing code in the C language. There is a third possibility, using the Arduino development environment.
IMPORTANT: This kit contains everything you need to program it. Note that you will also need a soldering iron, which is not part of this package. If you still don’t have a soldering iron, take a look at the Tinusaur Starter Super package, which contains, in addition to the boards from this kit, a soldering iron, and additional tools.
Contents
The Tinusaur Main Board has a Microchip ATtiny85 microcontroller, button, programming connector, battery socket, and battery. It also includes extension headers to connect an additional shield board.
SKU: PBTMB-G4247-48 TPC: 2J9FAC
The Shield LEDx2 board is an add-on for the main board. It has 2 LEDs: red and green, and resistors. Includes pin headers to connect to the main board and for extensions such as sensors, communication, and servo motor.
SKU: PSLD2-G4348-39 TPC: 86PJL2
The Shield EDUx3IO board is an add-on for the main board. It adds a white LED, a photoresistor (LDR), and a passive buzzer, as well as pin header connectors for the servo motor, audio output, and external communication.
SKU: PSED3-G424A-39 TPC: 1O6AJY
The Plate Wood SED is a 1-piece wood plate for the Tinusaur Main Board, laser cut from plywood. It is mainly used for the Starter EDU kit, but is suitable for various kits and projects. Includes bolts, spacers, and a screwdriver.
SKU: PLPSD-G4141-49 TPC: WNCYWA
This information was fetched from the Tinusaur Products Registry Database
Useful Links
Where can you get the most current product information?
Most of our products have a sticker on their package with a QR code you can scan. It will take you to a special page with the most current information about the package.
You can also go to tinusaur.com/sku and enter the SKU.
