Connecting 2 Boards – for Beginners

Connecting 2 Boards - for Beginners

How to write the code to connect 2 Tinusaur boards – for beginners? This tutorial is written specifically for Tinusaur Boards with  Shield EDUx3IO and Shield LEDx2 boards but could be used as a reference for any other ATtiny85-based board. This is a beginners’ tutorial which means that the code is written using the block-based development environment Blocktinu. …   Learn more …

Connecting 2 Tinusaur Boards Gen:4 mk-II

Connecting 2 Tinusaur Boards Gen:4 mk-II

How to connect 2 Tinusaur boards with Shield boards on them using 3 wires? This tutorial is written specifically for Tinusaur Boards, generation 4, for the latest versions of the Shield EDUx3IO and Shield LEDx2 boards (a.k.a. mk-II), manufactured and sold in 2024 and onwards. To make sure you have the same ones – check …   Learn more …

Connecting 2 Tinusaur Boards Gen:4 mk-I

Connecting 2 Tinusaur Boards Gen:4 mk-I

How to connect 2 Tinusaur boards with Shield boards on them using 2 wires? This tutorial is written specifically for Tinusaur Boards, generation 4, but for the earlier versions of the Shield EDUx3IO and Shield LEDx2 boards (a.k.a. mk-I), manufactured and sold in 2022 and 2023. To make sure you have the same ones – …   Learn more …

Input / Output Ports – LEDs

Input / Output Ports - LEDs

How do we connect LEDs to an ATtiny85 microcontroller and work with them by manipulating the Input/Output ports through the bits in the registers? This is a topic as old as microcontrollers so let’s dive into it. Hardware We’re going to use a Tinusaur board with an ATtiny85 microcontroller and an additional board such as …   Learn more …

How to connect ATtiny85 to multiple MAX7219 LED 8×8 Matrices

MAX7219 ATtiny85 for Multiple LED Matrices

How we could work with multiple MAX7219 LED 8×8 matrices connected in a chain, light up some LEDs, and use a memory buffer to save the current state of the LEDs. In our previous tutorial, we discussed how to create an interface between the ATtiny85 microcontroller and MAX7219 controller and connect a single 8×8 LED matrix. The …   Learn more …

How to connect MAX7219 to an ATtiny85 and work with an 8×8 LED Matrix

MAX7219tiny MAX7219 ATtiny85

What’s our goal? To connect a MAX7219 based LED Matrix module to an ATtiny85 microcontroller and control the LEDs. Doesn’t sound very complicated, right? The Titorial We wrote a short tutorial about how MAX7219 modules work, how to connect them to ATtiny85, and how to write a simple library to work with them Continue reading the MAX7219 ATtiny85 tutorial …   Learn more …

Item added to cart.
0 items - $0.00