fbpx

Tinusaur Starter Super Deluxe Gen:4

$89.99

Tinusaur Starter Super is a special 2-package kit containing all you need to assemble a miniature computer that you can then program. It also includes two additional boards with electronic components and a prefabricated wooden stand for the assembled boards and projects. The soldering iron and all the necessary tools for soldering the boards are included in the package.

Once assembled, this board can be programmed with our own Blocktinu development environment. This can be done by block programming or by writing code in the C language. There is a third option, using the Arduino development environment.

Only 5 left in stock

Category: Tags: , , ,

Description

  1. The first kit Starter EDU contains:
    • Tinusaur Board
      Tinusaur main microcontroller board with ATtiny85 on it (1 MHz, 8-bit RISK CPU, 8KB Flash, 512B RAM, 512B EEPROM) along with all electronic components for its stable operation, battery, and programming connector;
    • Tinusaur Shield LEDx2
      Additional shield board with 2 LEDs, 2 resistors, and headers;
    • Tinusaur Shield EDUx3IO
      Additional shield board with LED, photoresistor, buzzer button, 2 resistors, and headers;
    • USB programmer
      USBasp programmer with cable;
    • Stand
      Prefabricated wooden stand for the assembled boards and projects.
  2. The second kit soldering iron  with tools contains:
    • Soldering iron 5V 8W with a USB cable and stand;
    • Solder wire 1mm / 16g;
    • USB adapter, 5V 2A;
    • Cleaning sponge;
    • Cable cutters.

Main Board

Tinusaur main microcontroller board with ATtiny85 on it (1 MHz, 8-bit RISK CPU, 8KB Flash, 512B RAM, 512B EEPROM) along with all electronic components for its stable operation, battery, and programming connector.

Tinusaur Board Gen:4 mk-II

 

Board Shield LEDx2

Add-on board (also called a shield) LEDx2 consisting of a board with 2 LEDs – red/green, 2 resistors, and headers.

Tinusaur Shield LEDx2 Gen:4 mk-III

Board Shield EDUx3IO

Add-on board (also called a shield) EDUx3IO consists of a board, LED, photoresistor, buzzer, 2 resistors, and headers.

Tinusaur Shield EDUx3IO Gen:4 mk-II

Programmer USB

USBasp programmer with a cable for uploading the code to the board.

USBasp Programmer

Stand

Prefabricated wooden plate for the assembled boards and projects.

PLPSDG414149

Soldering Kit

Soldering iron 5V 8W with a USB cable and stand; Solder wire 1mm / 16g; USB adapter, 5V 2A; Cleaning sponge; Cable cutters.

Toolkit Soldering

 

You may also like…

BTSPRD424249
Tinusaur Starter Super Deluxe Gen:4
$89.99