Tinusaur Starter Super Gen:3 (2019)

Tinusaur Starter Super Gen3

Package contents

The first set consists of:
(Tinusaur Starter EDU Gen:3)

  1. Tinusaur Board
    Tinusaur microcontroller board with ATtiny85 on it (1 MHz, 8-bit RISK CPU, 8KB Flash, 512B RAM, 512B EEPROM) along with all electronic components for its stable operation, battery, and programming connector
  2. Tinusaur Shield LEDx2
    Additional shield board with 2 LEDs, 2 resistors, and headers;
  3. Tinusaur Shield EDUx4IO
    Additional shield board with LED, photoresistor, buzzer button, 2 resistors, and headers;
  4. USB programmer
    USBasp programmer with cable.

The second set consists of:
(Tools Kit for Soldering)

  1. Soldering iron 5V 8W with USB cable and stand;
  2. Solder wire 1mm / 16g;
  3. USB adapter, 5V 2A;
  4. Cleaning sponge;
  5. Cable cutters.

Once assembled, the microcontroller boards can be programmed with our own Blocktinu development environment. This is done in two ways – by block programming or by writing code in the C language. There is a third possibility, using the Arduino development environment.

IMPORTANT: To assemble the Tinusaur Starter kit’s boards, you will need a soldering iron and some other tools – part of the Tinusaur Starter Super package. If you already have these tools, take a look at the Tinusaur Starter EDU kit.

Item added to cart.
0 items - $0.00