Tinusaur Starter Super Gen:3 (2019)
Tinusaur Starter Super is a special kit (of 2 packages) that contains everything you need to assemble a miniature computer that you can then program. It also includes two additional boards with electronic components. In the package, you receive a soldering iron with all the necessary tools for soldering the boards.
Tinusaur Starter Super
Tinusaur Starter Super is a special kit (of 2 packages) that contains everything you need to assemble a miniature computer that you can then program. It also includes two additional boards with electronic components and a prefabricated wooden stand for the assembled boards and projects. In the package, you receive a soldering iron with all the necessary tools for soldering the boards.
Tinusaur Starter EDU Gen:3 (2019)
Tinusaur Starter EDU is a kit that contains everything you need to assemble a miniature computer that you can then program. It also includes two additional boards with electronic components.
Tinusaur Starter EDU
Tinusaur Starter EDU is a set of 3 electronic boards, one of which has a microcontroller (a type of microprocessor), and the other two are additional boards with various electronic components on them, such as LEDs, photosensor, button, and buzzer. The kit also includes a USB programmer, as well as a prefabricated wooden stand for assembled boards and projects.
Addition Shield LEDx12-C
The add-on board LEDx12 (also called a shield) is a package of a board, 12 LEDs that are arranged in a circle, and a buzzer to generate sound. The LEDs are connected according to the so-called Charlieplexing circuit.
Shield LEDx3 Gen:3 mk-I
The Shield LEDx3 board is an add-on for the main board. It has 3 LEDs: red, yellow, and green, as well as resistors. Includes headers to connect to the main board and a 2-pin header for extension.
Shield PROTOx80 Gen:3 mk-I
The add-on board (also called a shield) PROTOx80 is a set of a prototype board with two headers. This board would be useful if you want to create your own projects based on the Tinusaur platform.
Stand Wood SED Gen:4 mk-I
The Stand Wood SED is a 3-piece wood stand for the Tinusaur Main Board, laser cut from plywood. It is mainly used for the Starter EDU kit, but it is suitable for various projects, including traffic lights and many others.
Tinusaur Starter STD Gen:3 (2019)
Tinusaur Starter STD is a kit that contains everything you need to assemble a miniature computer that you can then program. It also includes two additional boards with electronic components.
Tinusaur Board Gen:4 mk-II
Tinusaur main microcontroller board with ATtiny85 on it (1 MHz, 8-bit RISK CPU, 8KB Flash, 512B RAM, 512B EEPROM) along with all electronic components for its stable operation, battery, and programming connector.
Shield LEDx2 Gen:4 mk-II
The Tinusaur Shield LEDx2 board is an excellent addition to the Tinusaur set and will allow you to learn even more about electronics and programming. …
Tinusaur Shield EDUx3IO Gen:4 mk-I
The Tinusaur Shield EDUx3IO board is an excellent addition to the Tinusaur set and will allow you to learn even more about electronics and programming. …
Tinusaur Shield LEDx1 Gen:2 mk-I
The Tinusaur Shield LEDx1 board is an excellent addition to the Tinusaur set and will allow you to learn even more about electronics and programming. …
Shield LEDx5 Gen:1
The Tinusaur Shield LEDx5 board is an excellent addition to the Tinusaur set and will allow you to learn even more about electronics and programming. …
Tinusaur Continu Gen:1 mk-II
This is Tinusaur Continu – Continuity Tester Gen:1 mk-II What is a Continuity Tester? A continuity tester is a simple electrical testing device used to …
Solar Grasshopper TSGG-01
The Solar Grasshopper TSGG-01 is a STEM kit for demonstrating solar power. Exposed to very bright light, the solar panel generates electricity that powers the small motor moving the grasshopper in random directions.
Electricity Generator Hand Crank TEGHC-01
A Hand Crank Electricity Generator STEM kit incorporates several key components to demonstrate energy conversion and electricity generation through manual effort. What is an Electricity …
Shield LEDx2 Gen:4 mk-III
The Shield LEDx2 board is an add-on for the main board. It has 2 LEDs: red and green, and resistors. Includes pin headers to connect to the main board and for extensions such as sensors, communication, and servo motor.
Tinusaur Shield EDUx3IO Gen:4 mk-II
The Shield EDUx3IO board is an add-on for the main board. It adds a white LED, a photoresistor (LDR), and a passive buzzer, as well as pin header connectors for the servo motor, audio output, and external communication.
Tinusaur Board Gen:4 mk-I (beta/2019) Free PCB
This is the Tinusaur Board Gen:4 mk-I Free PCB. IMPORTANT: This is only the PCB.You have to obtain all the electronic parts yourself. Tinusaur main …
Tinusaur Starter EDU Gen:4 mk-I
Tinusaur Starter EDU is a kit that contains everything you need to assemble a miniature computer that you can then program. It also includes two additional boards with electronic components.
Tinusaur Shield LEDx2
The Tinusaur Shield LEDx2 board is an excellent addition to the Tinusaur set and will allow you to learn even more about electronics and programming. …
Tinusaur Starter EDU Gen:4 mk-II
Tinusaur Starter EDU is a kit that contains everything you need to assemble a miniature computer that you can then program. It also includes two additional boards with electronic components.
Shield LEDx3 Gen:4 mk-II
The Shield LEDx3 board is an add-on for the main board. It has 3 LEDs: red, yellow, and green, as well as resistors. Includes pin headers to connect to the main board and to extensions such as sensors, communication, and actuators.
Shield GAMEx331 Gen:1 mk-II
The Tinusaur Shield GAMEx331 board is an excellent addition to the Tinusaur set and will allow you to learn even more about electronics and programming. …
Shield PARKx5 Gen:1 mk-I
The Tinusaur Shield PARKx5 board is an excellent addition to the Tinusaur set and will allow you to learn even more about electronics and programming. …
Tinusaur Kids.Micro Gen:4 STEM
Tinusaur Kids.Micro is the miniature computer that every student can assemble, learn to program, and use to work on interesting and practical projects. This is the …
Tinusaur Starter NXT Gen:4 STEM
The Tinusaur Starter NXT is the next bundle in your learning journey, consisting of 3 electronic boards: main board; additional shield with 3 LEDs; shield with LED, magnetic Hall-effect sensor, buzzer. Includes servo motor and wooden stand.
Tinusaur Kids.Mini Gen:4 STEM
The Tinusaur Kids.Mini is the continuation bundle that builds upon the previous kits to explore mechanical systems. Consists of the microcontroller board, servo motor with a lever, wood frame for your projects, and an external power cable.
Traffic Lights x3PPC Gen:4 STEM
Traffic Lights x3PPC is a project consisting of 3 board sets. For pedestrians: one with 2 LEDs and another with a buzzer, LED, and photoresistor. …
Traffic Lights x2PC Gen:4 STEM
Traffic Lights x2PC is a project consisting of two board sets – one with 2 LEDs (for pedestrians) and another with 3 LEDs (for cars). …
Traffic Lights x2PP Gen:4 STEM
Traffic Lights x2PP is a project consisting of two board sets (for pedestrians) – one with two LEDs and another with a buzzer, LED, and …
Alarm System MS Gen:4 STEM
Alarm System MS is a project consisting of 3 electronic boards, including a microcontroller and a shield. It has a microwave precision sensor for activation, light signaling, sound alarm with a high-decibel piezo buzzer, and an operating modes button.
Alarm System LS Gen:4 STEM
Alarm System LS is a project consisting of 3 electronic boards, including a microcontroller and a shield. It has a laser sensor and mirror for activation, light signaling, a sound alarm with a high-decibel piezo buzzer, and an operating modes button.
Alarm System PS Gen:4 STEM
Alarm System PS is a project consisting of 3 electronic boards, including a microcontroller and a shield. It has a PIR sensor for activation, light signaling, sound alarm with a high-decibel piezo buzzer, and an operating modes button.
Solar Pod LT Gen:4 STEM
The Solar Pod LT is an educational smart solar-tracking project kit. Uses photosensor for light sensing and servo motor for repositioning its solar panel to charge the Li-Po battery, creating a prototype of an intelligent photovoltaic system.
Cartinu GP Gen:3 STEM
The Cartinu GP is an educational robotic car that combines mechanics, electronics, and programming into a compact mobile platform suitable for classroom projects and experimentation. Ideal for studying motion control, sensors, and automation.
AWDIU SR Gen:2 STEM
AWDIU SR is the Autonomous Water Drip Irrigation Unit (Small Rig variant) project, consisting of 3 electronic boards, including a microcontroller, a shield, and a motor driver add-on. It has a soil moisture sensor and a water pump.
AWDIU LR Gen:2 STEM
AWDIU LR is the Autonomous Water Drip Irrigation Unit (Large Rig variant) project. Has 3 electronic boards: microcontroller, shield, motor driver add-on; also: soil moisture sensor, water pump and filter, water lines, pot, frame, and power.
Package Shield LEDx12-C
The add-on board Shield LEDx12 is a package consisting of a board, 12 LEDs arranged in a circle, and a buzzer to generate sound. The LEDs are connected according to the so-called Charlieplexing circuit.
Programmer USBasp
The USBasp programmer is the USB device that you use to upload your code from your computer directly to the ATtiny85 microcontroller of your Tinusaur board. This is done via its flat 10-wire cable.
Plate Wood SED Gen:4 mk-I
The Plate Wood SED is a 1-piece wood plate for the Tinusaur Main Board, laser cut from plywood. It is mainly used for the Starter EDU kit, but is suitable for various kits and projects. Includes bolts, spacers, and a screwdriver.
Shield LEDx2 Gen:4 mk-I
The Tinusaur Shield LEDx2 board is an excellent addition to your Tinusaur kit and will allow you to learn even more about electronics and programming. …
Tinusaur Board Gen:4 mk-I
Tinusaur main microcontroller board with ATtiny85 on it (1 MHz, 8-bit RISK CPU, 8KB Flash, 512B RAM, 512B EEPROM) along with all electronic components for its stable operation, battery, and programming connector.
Tinusaur Starter EDU Gen:4 mk-I Amazon
Tinusaur Starter EDU is a kit that contains everything you need to assemble a miniature computer that you can then program. It also includes two additional boards with electronic components.
Tinusaur Starter EDU Gen:4 mk-I RobotShop
Tinusaur Starter EDU is a kit that contains everything you need to assemble a miniature computer that you can then program. It also includes two additional boards with electronic components.
Tinusaur Kids.Micro Gen:4 mk-II
Tinusaur Kids.Micro is the miniature computer that every student can assemble, learn to program, and use to work on interesting and practical projects. This is the …
Tinusaur Kids.Micro Gen:4 mk-I
The Tinusaur Kids.Micro Board has a Microchip ATtiny85 microcontroller, red and green LED, a photoresistor (LDR), a passive buzzer, and a button. It also has a programming connector, a battery socket, and a battery.
Tinusaur Starter EDU Deluxe Gen:4
The Tinusaur Starter EDU Deluxe bundle consists of 3 electronic boards: the main board with the microcontroller, the additional board with 2 LEDs, and another …
Tinusaur Starter Super Deluxe Gen:4
The Tinusaur Starter Super Deluxe bundle consists of 3 electronic boards: the main board with the microcontroller, the additional board with 2 LEDs, and another …
Soldering Kit Gen:4 mk-I
The Soldering Kit is a set of tools and materials for soldering electronic components to a board. Includes soldering iron working at 5 V and 8 W power, a stand, USB power supply, cable, solder wire, wire cutters, and sponge.
Utility Multivibrator Gen:1 mk-I
The Multivibrator board is a classic circuit of an electric rectangular pulse generator. It can be used to study the laws of electricity and the …
Tinusaur Board LTE Gen:4 mk-II
Tinusaur main microcontroller board with ATtiny85 on it (1 MHz, 8-bit RISK CPU, 8KB Flash, 512B RAM, 512B EEPROM) along with all electronic components for its stable operation, battery, and programming connector.
Soldering Set Gen:4 mk-I
The Soldering Set is a set of tools and materials for soldering electronic components to a board. Includes soldering iron working at 5 V and 8 W power, a stand, USB power supply, cable, wire cutters, and sponge.
Solar Car MSV-01
Hands-on solar-powered wooden car kit designed for student assembly. It offers a fun and engaging way to explore electricity generation using solar power, renewable energy, and basic engineering principles.
Addition Shield LEDx3
The Addition Shield LEDx3 is a board with 3 LEDs: red, yellow, and green, arranged in a column like traffic lights. It also includes the necessary current-limiting 330 Ohm resistors and the headers to connect to the Tinusaur main board. It is ideal for extending the functionality of your Tinusaur kit.
Stand Wood SED Gen:4 mk-II
The Stand Wood SED is a 3-piece wood stand for the Tinusaur Main Board, laser cut from plywood. It is mainly used for the Starter EDU kit, but it is suitable for various projects, including traffic lights and many others.
Shield MAGx3IO Gen:4 mk-I
The Shield MAGx3IO board is an add-on for the main board. It adds: white LED, Hall-effect magnetic sensor, passive buzzer, pin header connectors for the servo motor, audio output, and external communication.
Tinusaur Kids.Mini Gen:4 mk-I
The Tinusaur Kids.Mini Board has a Microchip ATtiny85 microcontroller, a red LED, a photoresistor (LDR), a passive buzzer, a button, and a servo motor connector. It also has a programming connector and a power connector.
Servo and Arm Circle Kit
The Servo and Arm Circle Kit is an addition to various boards and projects. It adds a servo motor and a servo arm in the form of a nylon circle with a dozen mounting holes. The necessary bolts and screws are also included.
Servo and Arm Small Kit
The Servo and Arm Small Kit is an addition to various boards and projects. It adds a servo motor and a servo arm in the form of a nylon circle and a short wooden arm. The necessary bolts and screws are also included.
Power USB-micro
The Power USB-micro package is an addition to various boards and projects. It allows connecting an external power source via a micro-USB cable. It usually connects to the external power connector on the main board.
Tinusaur Kids.Mini Gen:4 mk-II
The Tinusaur Kids.Mini is the continuation bundle that builds upon the previous kits to explore mechanical systems. Consists of the microcontroller board, servo motor with a lever, wood frame for your projects, and an external power cable.
Plate Wood SNX Gen:4 mk-I
The Plate Wood SNX is a 2-piece wood plate for the Tinusaur Main Board, laser cut from plywood. It is mainly used for the Starter NXT kit, but is suitable for various kits and projects, especially those with a servo motor.
Shield MOTOx4 SIR Gen:4 mk-I
The MOTOx4 SIR board is the IR (infra-red) sensor board for your MOTOx4 Shield. It is used to recognize the black and white areas on the floor. The MOTOx4 Shield is part of the Tinusaur Robot Car called CARTINU.
Shield MOTOx4 BAS Gen:4 mk-I
The MOTOx4 BAS is the Shield that is the base for the Tinusaur Robot Car called CARTINU, where the motors are connected, and the various additional sensor boards are attached.
Frame Wood SPL Gen:2 mk-II
The Frame Wood SPL is an essential part of the Solar Pod LT project bundle. It is a wooden mounting frame designed to provide stable mechanical support for the solar panel, servo motor, and electronics, enabling smooth, accurate movement.
Solar Cell LT Kit
The Solar Cell LT Kit is an essential part of the Solar Pod LT project bundle. It includes a single photovoltaic cell and the necessary connection cables. It provides the energy to charge the rechargeable battery.
PSU Battery LiPo SPL
The PSU Battery LiPo SPL is an essential part of the Solar Pod LT project bundle. Includes rechargeable LiPo battery and charging module. Stores energy generated by the solar cell, provides stable power for the electronics and the servo motor.
Power Switch MB Kit
The Power Switch MB Kit is an essential part of the Solar Pod LT project bundle – a dedicated on/off power switch for the main board. Allows safe and convenient manual control of the power supply, making it easier to start/stop and test.
Add-on CPHx4 Gen:1 mk-I
The Add-on CPHx4 is a communication and power hub board that is an essential part of many Tinusaur project kits. Its dual purpose is to power multiple microcontroller boards by connecting them with a 3-wire cable and to allow data exchange.
Magnet Neodymium Circular Kit
The Circular Neodymium Magnet kit provides stable, high-flux magnetic fields for shield boards and projects using a Hall-effect sensor, with an integrated mounting bolt and optional nut for secure installation.
Jump Cable 3-wire F-F x1
The Jump Cable 3-wire F-F x1 is a flexible cable with female-to-female connectors, a.k.a. DuPont. Used for quick and reliable signal and power connections between boards, modules, sensors, actuators, and other devices.
Jump Cable 3-wire F-F x2
The Jump Cable 3-wire F-F x2 is a package of 2 3-wire flexible cables with female-to-female connectors, a.k.a. DuPont. Used for signal and power connections between boards, modules, sensors, actuators, and other devices.
Jump Cable 3-wire F-F x3
The Jump Cable 3-wire F-F x3 is a package of 3 3-wire flexible cables with female-to-female connectors, a.k.a. DuPont. Used for signal and power connections between boards, modules, sensors, actuators, and other devices.
Add-on PZDx1 Gen:4 mk-II
The Add-on CPHx4 is a communication and power hub board that is an essential part of many Tinusaur project kits. Its dual purpose is to power multiple microcontroller boards by connecting them with a 3-wire cable and to allow data exchange.
Projector for Slides TLPSS-01
The Light Projector for Slides TLPSS-01 is an educational kit for demonstrating the basic principles of optics and image projection. Has wooden enclosure, allows projecting transparent slides using an LED light source and lens system.