The Tinusaur Starter NXT is the next bundle in your learning journey, consisting of 3 electronic boards: main board; additional shield with 3 LEDs; shield with LED, magnetic Hall-effect sensor, buzzer. Includes servo motor and wooden stand.
IMPORTANT: This is an upgrade kit for Level-2, which means that: (1) To use it fully, you must have previously worked with at least one Starter Kit for Level-1, such as Starter EDU or Kids.Micro; (2) The USBasp USB programmer, which is part of the Starter Kit for Level-1, is not included with this kit.
Tinusaur Board LTE Gen:4 mk-II
The Tinusaur Main Board has a Microchip ATtiny85 microcontroller, button, and programming connector. A battery and socket are not included. It also has extension headers to connect an additional shield board.
SKU: PBTBL-G4247-48 TPC: SKP3XF
The Shield LEDx3 board is an add-on for the main board. It has 3 LEDs: red, yellow, and green, as well as resistors. Includes pin headers to connect to the main board and to extensions such as sensors, communication, and actuators.
SKU: PSLD3-G4245-48 TPC: 5RS7EB
The Shield MAGx3IO board is an add-on for the main board. It adds: white LED, Hall-effect magnetic sensor, passive buzzer, pin header connectors for the servo motor, audio output, and external communication.
SKU: PSMG3-G4143-48 TPC: QWCBKS
The Plate Wood SNX is a 2-piece wood plate for the Tinusaur Main Board, laser cut from plywood. It is mainly used for the Starter NXT kit, but is suitable for various kits and projects, especially those with a servo motor.
SKU: PLPSX-G4141-49 TPC: ZC9CNI
The Servo and Arm Small Kit is an addition to various boards and projects. It adds a servo motor and a servo arm in the form of a nylon circle and a short wooden arm. The necessary bolts and screws are also included.
SKU: PKSAS-G4141-49 TPC: A6N64D
The Circular Neodymium Magnet kit provides stable, high-flux magnetic fields for shield boards and projects using a Hall-effect sensor, with an integrated mounting bolt and optional nut for secure installation.
SKU: PKMNC-G1111-5C TPC: XGABGP
The Power USB-micro package is an addition to various boards and projects. It allows connecting an external power source via a micro-USB cable. It usually connects to the external power connector on the main board.
SKU: PLPUM-G1X1X-4C TPC: 4WJ00N
This information was fetched from the Tinusaur Products Registry Database
Most of our products have a sticker on their package with a QR code you can scan. It will take you to a special page with the most current information about the package.
You can also go to tinusaur.com/sku and enter the SKU.
