Tinusaur at Amazon: https://www.amazon.com/dp/B08V5RNWMV.
Contents
The Tinusaur Main Board has a Microchip ATtiny85 microcontroller, button, programming connector, battery socket, and battery. It also includes extension headers to connect an additional shield board.
SKU: PBTMB-G4142-05 TPC: K6J6I1
The Shield LEDx2 board is an add-on for the main board. It has 2 LEDs: red and green, and resistors. Includes pin headers to connect to the main board and for extensions such as servo motor.
SKU: PSLD2-G4143-06 TPC: WDTOXF
The Shield EDUx3IO board is an add-on for the main board. It adds a white LED, a photoresistor (LDR), and a passive buzzer, as well as pin header connectors for the servo motor, audio output, and external communication.
SKU: PSED3-G4145-24 TPC: 9YYUL9
The USBasp programmer is the USB device that you use to upload your code from your computer directly to the ATtiny85 microcontroller of your Tinusaur board. This is done via its flat 10-wire cable.
SKU: PUPUA-G1X1X-00 TPC: LJC4HL
The Stand Wood SED is a 3-piece wood stand for the Tinusaur Main Board, laser cut from plywood. It is mainly used for the Starter EDU kit, but it is suitable for various projects, including traffic lights and many others.
SKU: PLSSD-G4140-0A TPC: 5KEUV6
This information was fetched from the Tinusaur Products Registry Database