The Solar Pod LT is an educational smart solar-tracking project kit. Uses photosensor for light sensing and servo motor for repositioning its solar panel to charge the Li-Po battery, creating a prototype of an intelligent photovoltaic system.
IMPORTANT: This is an upgrade kit for Level-2, which means that: (1) To use it fully, you must have previously worked with at least one Starter Kit for Level-1, such as Starter EDU or Kids.Micro; (2) The USBasp USB programmer, which is part of the Starter Kit for Level-1, is not included with this kit.
We are updating the information about this product
Tinusaur Board LTE Gen:4 mk-II
The Tinusaur Main Board has a Microchip ATtiny85 microcontroller, button, and programming connector. A battery and socket are not included. It also has extension headers to connect an additional shield board.
SKU: PBTBL-G4247-48 TPC: SKP3XF
The Shield SOLRx4 is a sensor and actuator interface board for the Solar Pod project kits. It consists of: a photoresistor for light sensing, a red LED for indication, a buzzer for audio, and a connector for servo motor control.
SKU: PSSL4-G1113-49 TPC: B2BYE3
The Frame Wood SPL is an essential part of the Solar Pod LT project bundle. It is a wooden mounting frame designed to provide stable mechanical support for the solar panel, servo motor, and electronics, enabling smooth, accurate movement.
SKU: PLFSL-G2222-52 TPC: 8I4CMC
The Servo and Arm Circle Kit is an addition to various boards and projects. It adds a servo motor and a servo arm in the form of a nylon circle with a dozen mounting holes. The necessary bolts and screws are also included.
SKU: PKSAC-G4141-54 TPC: K9895J
The Solar Cell LT Kit is an essential part of the Solar Pod LT project bundle. It includes a single photovoltaic cell and the necessary connection cables. It provides the energy to charge the rechargeable battery.
SKU: PKSCL-G2121-51 TPC: 8ZFRMH
The PSU Battery LiPo SPL is an essential part of the Solar Pod LT project bundle. Includes rechargeable LiPo battery and charging module. Stores energy generated by the solar cell, provides stable power for the electronics and the servo motor.
SKU: PLBLS-G2222-51 TPC: 5F44KN
The Power Switch MB Kit is an essential part of the Solar Pod LT project bundle - a dedicated on/off power switch for the main board. Allows safe and convenient manual control of the power supply, making it easier to start/stop and test.
SKU: PKPSB-G1111-52 TPC: 21MVFP
This information was fetched from the Tinusaur Products Registry Database
Most of our products have a sticker on their package with a QR code you can scan. It will take you to a special page with the most current information about the package.
You can also go to tinusaur.com/sku and enter the SKU.
